LCD Encyclopedia

How To Repair The Failure Of LCD?

Views : 31
Author : China LCD supplier
Update time : 2020-04-23 14:21:10
First of all, understand that the common faults of LCD are as follows: White screen, flower screen, black screen, yellowing, white spots, adventitia scratches, color deviation, bright and dark lines, and so on. How to repair the failure of LCD?

First, the maintenance methods of white screen, black screen, yellowing, white spots and so on.

The white screen is mainly caused by abnormal power supply of + 3.3V or + 5V of LCD screen.

The main reason for black screen and dark screen is the aging of CCFL, so just change the lamp tube directly.

Yellow and white spots are the problems of backlight, which can be solved by replacing the corresponding backlight sheet or light guide plate.

Outer film scratch means that the polarizer on the surface of liquid crystal glass is damaged and can be replaced by purchasing a suitable polarizer.

Anti-static treatment should be done during maintenance to prevent damage to large-scale CMOS integrated circuits, and the LCD screen should be protected to ensure that the LCD screen will not be damaged.

Second, color bias:

1. Check the motherboard signal RGB input to the main chip part of the circuit (with or without virtual welding short circuit, capacitance and resistance error).

two。. Enter the factory mode, adjust the white balance, can you bring up the normal color.

3. Replace MCU or re-burn MCU if necessary.

4. Change the line and try to replace it with a general-purpose board to write the program.

Third, Flower screen.

1. Measure whether the motherboard clock output is normal.

two。. Check the motherboard signal RGB input to the main chip part of the circuit (with or without false welding, short circuit, capacitance resistance error value.

3. Check the motherboard signal output to the connection seat part of the output to the screen for false welding, short circuit (IC pin, resistance and seat, double-row pin, pay special attention to the flat socket.

4. Replace the screen or universal driver board if necessary.

4. Bright or dark lines on the screen.

This problem is usually caused by the failure of the LCD screen.

The bright line fault is usually caused by a problem with the wiring connected to the LCD body.

The dark line is generally that the body of the screen has leakage, the above two problems are basically sentenced to death to the machine, there is no maintenance value, and because of safety problems, it is recommended to find a professional.
Related News
Read More >>
INNOLUX Has Become Gou's Second Trump Card Besides Foxconn INNOLUX Has Become Gou's Second Trump Card Besides Foxconn
May .31.2020
As a high-tech group specializing in 3C products and semiconductor equipment, Foxconn has become the world's largest professional electronics manufacturer, with revenue of 408.698 billion yuan in 2019, and it has also become Terry Gou's biggest trump card
Discussion On LCD Soft Screen And Hard Screen Technology Discussion On LCD Soft Screen And Hard Screen Technology
May .29.2020
In the past 10 years, wide-view LCD technology has been completely divided into two types: vertical-oriented soft screen and horizontal-oriented hard screen. PSVA, HVA (CSOT) and UV2A (Sharp) all belong to the soft screen VA technology, while the horizont
COVID-19 Boomed Medical LCD Panel Market COVID-19 Boomed Medical LCD Panel Market
May .27.2020
The spread of the COVID-19 epidemic has led to a surge in global demand for medical equipment, leading to buoyant shipments of medical lcd panel orders in the first half of this year.
BOE Low Blu-ray Display Solution Is Certified By T Ü V Rheinland BOE Low Blu-ray Display Solution Is Certified By T Ü V Rheinland
May .21.2020
On May 20th, T Ü V Rheinland Group, a global third-party testing, inspection and certification body, jointly held an online press conference with EyeSafe. As one of the first Eyesafe display standards and T Ü V Method2 certified enterprise, BOE 7 low Blu-