News Category Home > Hot Products

Hot selling BOE 18.5 inch screen

Views : 34
Update time : 2017-06-27 17:13:32
MV185WHB-N10 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 18.5 inch diagonally measured active area with WXGA resolutions (1366 horizontal by 768 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 16.7M colors. The TFT-LCD panel used for this module is adapted for a low reflection and higher color type.
 
 

Features
-LVDS Interface with 1 pixel / clock
-High-speed response
-Low power consumption
-6-bit (Hi-FRC) color depth, display 16. 7M colors
-Incorporated edge type back-light (One Light Bar)
-High luminance and contrast ratio, low reflection and normal viewing angle
-DE (Data Enable) only
-RoHS
-ES 6.0 compliant
-Gamma correction

Application
-Desktop Type of PC & Workstation Use
-Slim-Size Display for Stand-alone Monitor
-Display Terminals for Control System
-Monitors for Process Controller

HANDLING & CAUTIONS
(1) Cautions when taking out the module
-Pick the pouch only, when taking out module from a shipping package.
(2) Cautions for handling the module
-As the electrostatic discharges may break the LCD module, handle the LCD
module with care. Peel a protection sheet off from the LCD panel surface as
slowly as possible.
-As the LCD panel and back - light element are made from fragile glass material,
impulse and pressure to the LCD module should be avoided.
-As the surface of the polarizer is very soft and easily scratched, use a soft dry
cloth without chemicals for cleaning.
-Do not pull the interface connector in or out while the LCD module is operating.
-Put the module display side down on a flat horizontal plane.
-Handle connectors and cables with care.
(3) Cautions for the operation
-When the module is operating, do not lose CLK, ENAB signals. If any one of
these signals is lost, the LCD panel would be damaged.
-Obey the supply voltage sequence. If wrong sequence is applied, the module
would be damaged.
(4) Cautions for the atmosphere
-Dew drop atmosphere should be avoided.
-Do not store and/or operate the LCD module in a high temperature and/or
humidity atmosphere. Storage in an electro-conductive polymer packing pouch
and under relatively low temperature atmosphere is recommended.
(5) Cautions for the module characteristics
-Do not apply fixed pattern data signal to the LCD module at product aging.
-Applying fixed pattern for a long time may cause image sticking.
(6) Other cautions
-Do not disassemble and/or re-assemble LCD module.
-Do not re-adjust variable resistor or switch etc.
-When returning the module for repair or etc., Please pack the module not to be
broken. We recommend to use the original shipping packages.