Sep.2019 29
Views: 1046
9 Maintenance Measures Of Industrial Touch Panel
In the process of using industrial touch panel, there will be some failures, such as insensitive carton phenomenon, what causes this phenomenon to occur?
In the process of using industrial touch panel, there will be some failures, such as insensitive carton phenomenon, what causes this phenomenon to occur? If the touch surface touchscreen responds slowly, it may be that the touch screen system is obsolete, the internal clock frequency is too low, or it cannot move because of water droplets on the touchscreen surface, in order to restore the industrial Touch panel to a fast response. The system must be replaced or upgraded, or the touchscreen surface must be wiped with a rag. In general, this is common for multitouch screens, but care should be taken to maintain them. It is also important to pay attention to the following nine additional issues that are not taken seriously in the use of detailed operations:

1. Industrial touch panel is a glass product, please put it gently to avoid cracking.

two。. The interface of industrial touch panel is conductive film. If the protective film is torn off, it is absolutely forbidden to press the surface of the product with nails, pencils, ballpoint pens or other sharp objects to avoid soiling and scratching the product.

3. Do not stick oil, water and other liquids to the surface of industrial touch panel.

4. When there is a stain on the surface of tea polyphenols, gently touch the alcohol with skimmed cotton balls or dust-free cloth, gently wipe the surface of the industrial Touch panel, and do not infiltrate the alcohol into the product.

5. Avoid using and storing organic solvents or corrosive gases (acid gases, etc.).

6. When installing industrial touch panel machines, please use non-corrosive glue to fix the product.

When installing the machine, please wear your fingertips or gloves to ensure the cleanliness of the product.

8. When it is found that the industrial touch panel does not work, please check whether there is false welding, whether the pin contact is good, whether the machine is installed correctly, and whether the operation touch position is accurate. If there is no such problem, please attach the protective film back to the surface of the product to ensure that the product is returned to the manufacturer for analysis and treatment.

9. After unpacking inspection, keep the original package sealed and stored to prevent the product from being affected by high temperature and high humidity, so as to produce watermark on the glass surface of the industrial touch panel.

The above is the problem of slow response of industrial touch panel. Do these protection measures, as far as possible to protect the touch screen, delay its service life, and avoid the phenomenon of slow response.

XIANHENG TECH is a professional industrial lcd supplier located in Shenzhen, the largest electronics city in China. If you have any questions, please feel free to email us to [email protected].
Please fill out the form below and click the button to request more information about
Ask me some questions*
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.